咨詢熱線
            
18621916738

        

        
        
        
    






    
            
    
    























	
當前位置：首頁   >  產品中心  >  西門子PLC模塊  >  西門子S7-1500PLC模塊  >  SM522數字量輸出模塊
            
              










	
    
 
        

    
            

                        

                        

                             
                            

                            
                            

                           
                        

                        

                        

                            
                            

                                
    
                                
                                    
    • 
                                
                                    
    • 
                                
                                    
    • 
                                
                                    
    • 
                                
                                    
    • 
                                
                                

                            

                            	
                        

                    

            
            
              
        

    
        
        

            
SM522數字量輸出模塊

            
簡要描述：SM522數字量輸出模塊，數字量輸出模塊可以切換設備中的 24 V DC 或 230 V AC 電壓，從而可將內部信號從控制器傳輸至設備。可以連接電磁閥、直流接觸器和指示燈。35 mm 寬的輸出模塊具有可設定的參數和診斷功能，因此可根據相應過程要求進行靈活調整。25 mm 寬的輸出模塊沒有可設定的參數或診斷功能，因此可極為方便地集成到工程系統中。建議將它們?cè)谥恍枰苌佥斎胪ǖ赖奈恢檬褂茫?

            
    
           
  • 產品型號： 
    • 
           
  • 廠商性質：代理商
    • 
           
  • 更新時間：2017-09-05
    • 
           
  • 訪  問  量：1507
    • 
                
            

            
        

        

    

    
	
    

    	
        
        

        	
詳細介紹

            

            	
SM522數字量輸出模塊，西門子SM522數字量輸出模塊，西門子S7-1500數字量輸出模塊，西門子數字量輸出模塊，數字量輸出模塊
數字量輸出模塊可以切換設備中的 24 V DC 或 230 V AC 電壓，從而可將內部信號從控制器傳輸至設備。可以連接電磁閥、直流接觸器和指示燈。
35 mm 寬的輸出模塊具有可設定的參數和診斷功能，因此可根據相應過程要求進行靈活調整。
25 mm 寬的輸出模塊沒有可設定的參數或診斷功能，因此可極為方便地集成到工程系統中。建議將它們?cè)谥恍枰苌佥斎胪ǖ赖奈恢檬褂茫蛟诒仨氃谑钟邢薜目臻g內部署大量通道的情況下使用。
西門子 現貨銷售 質保一年 歡迎詢價
SIEMENS 上海翰粵自動化系統有限公司
上海翰粵自動化系統有限公司是中國西門子的合作伙伴，公司主要從事工業自動化產品的集成,銷售各維修。致力于為您提供在工業、化工、水泥、電力、環保等領域的電氣及自動化技術的完整解決方案，包括自動化產品及系統、工程項目執行及管理、主要過程控制領域，以及專業的售后服務、培訓等。
上海翰粵代理銷售以下系列產品：
SIEMENS 可編程控制器
1、 SIMATIC S7 系列PLC：S7-200、S7-1200、S7-300、S7-400、ET-200，S71500
2、 邏輯控制模塊 LOGO！230RC、230RCO、230RCL、24RC、24RCL等
3、 SITOP直流電源 24V DC 1.3A、2.5A、3A、5A、10A、20A、40A可并聯.
4、HMI 觸摸屏TD200 TD400C K-TP OP177 TP177,MP277 MP377,
SIEMENS 交、直流傳動裝置
1、 交流變頻器 MICROMASTER系列：MM420、MM430、MM440、G110、G120.　　
　　MIDASTER系列：MDV
2、全數字直流調速裝置 6RA23、6RA24、6RA28、6RA70、6SE70系列
SIEMENS 數控 伺服
SINUMERIK:801、802S 、802D、802D SL、810D、840D、611U、S120
系統及伺報電機，力矩電機，直線電機，伺服驅動等備件銷售。
  型號及訂貨號
訂貨號：6ES7522-1BH01-0AB0
SIMATIC S7-1500, 數字量輸出模塊 DQ16xDC 24V/0,5A; 16 通道 8 個一組; 4A 每組; 單通道診斷; 替換值
 
 
訂貨號：
6ES7522-1BH10-0AA0
SIMATIC S7-1500, 數字量輸出模塊, DQ16xDC 24V/0,5A, 16 通道 8 個一組, 4A 每組 inkl. 前連接器 直插式
 
 
訂貨號：
6ES7522-1BL01-0AB0
SIMATIC S7-1500, 數字量輸出模塊 DQ 32xDC 24V/0,5A; 32 通道 8 個一組; 4A 每組; 單通道診斷; 替換值
訂貨號：6ES7522-1BL10-0AA0
SIMATIC S7-1500, 數字量輸出模塊, DQ32xDC 24V/0,5A, 32 通道 8 個一組, 4A 每組 inkl. 前連接器 直插式
訂貨號：6ES7522-5EH00-0AB0
SIMATIC S7-1500, 數字量輸出模塊 DQ16x 24...48VUC/125V DC/0.5A; 16 通道 8 個一組; 0.5A 每組; 替換值; DERATING 注意
訂貨號：6ES7522-5FF00-0AB0
SIMATIC S7-1500, 數字量輸出模塊 DQ 8xAC 230V/2A;TRIAC; 8 通道 8 個一組; 2A 每組; 替換值
 
訂貨號：6ES7522-5FH00-0AB0
SIMATIC S7-1500, 數字量輸出模塊 DQ 16xAC 230V/1A;TRIAC; 16 通道 8 個一組; 2A 每組; 替換值
 
訂貨號：6ES7522-5HF00-0AB0
SIMATIC S7-1500, 數字量輸出模塊 DQ 8xAC 230V/5A;繼電器; 8 通道 8 個一組; 5A 每組; 診斷;替換值
訂貨號：6ES7522-5HH00-0AB0
SIMATIC S7-1500, 數字量輸出模塊 DQ 16x 230V AC/2A ST;繼電器 16 通道 8 個一組; 4A 每組; 診斷;替換值
 
概述
  • 8、16 和 32 通道數字量輸出模塊
  • 靈活地選擇控制器以滿足相應任務需要
  • 用于使用附加輸出對系統進行后續擴展
  • 35 mm 寬的模塊具有參數設置和診斷功能
  • 25 mm 寬的模塊可在狹小空間內使用：極為經濟，無參數設置或診斷功能
應用
數字量輸出模塊可以切換設備中的 24 V DC 或 230 V AC 電壓，從而可將內部信號從控制器傳輸至設備。可以連接電磁閥、直流接觸器和指示燈。
35 mm 寬的輸出模塊具有可設定的參數和診斷功能，因此可根據相應過程要求進行靈活調整。
25 mm 寬的輸出模塊沒有可設定的參數或診斷功能，因此可極為方便地集成到工程系統中。建議將它們?cè)谥恍枰苌佥斎胪ǖ赖奈恢檬褂茫蛟诒仨氃谑钟邢薜目臻g內部署大量通道的情況下使用。
根據需要，可在一個站中并排使用兩種模塊。由于具有統一特性并采用共同的系統附件，處理十分方便。
提供了以下寬度為 35 mm 的數字量輸出模塊：
  • DQ 16x24VDC/0.5A ST；
    數字量輸出模塊，16 通道 24 VDC / 0.5 A（晶體管）；兩個電壓組；每組 4 A；可設置診斷功能；可設置輸出替代值
  • DQ 32x24VDC/0.5A ST；
    數字量輸出模塊，32 通道 24 VDC / 0.5 A（晶體管）；四個電壓組；每組 4 A；可設置診斷功能；可設置輸出替代值
  • DQ 8x24VDC/2A HF; 
    數字量輸出模塊，8 通道 24 VDC / 2 A（晶體管）；四個電壓組；每組 8 A；可設置診斷功能；可設置輸出替代值
  • DQ 8x230VAC/2A ST; 
    數字量輸出模塊，8 通道 230 VAC / 2 A（晶體管）；八個電壓組；每組 2 A；可設置診斷功能；可設置輸出替代值
  • DQ 8x230VAC/5A ST;
    帶有 8 點輸出的數字量輸出模塊，230 V AC/5 A（繼電器）；8 個電壓組；每組 5 A；可設置輸出的替代值
提供了以下寬度為 25 mm 的數字量輸出模塊：
  • DQ 16x24VDC/0.5A BA;
    帶有 16 個通道的數字量輸出模塊，24 VDC/0.5 A（晶體管）；源型輸出；兩個電壓組 4A
  • DQ 32x24VDC/0.5A BA;
    帶有 16 個通道的數字量輸出模塊，24 VDC/0.5 A（晶體管）；源型輸出；四個電壓組；每組 4 A
設計
  • 用一個螺絲安裝在 S7-1500 安裝導軌上
  • 35 mm 模塊 采用螺釘型端子或推入式端子的標準化 40 針前連接器（不能用于 25 mm 模塊）
  • 25 mm 模塊 采用推入式端子的標準化 40 針前連接器（不能用于 35 mm 模塊）
  • 標準化、協調型前連接器針腳分配，更便于接線
  • 可連接芯線截面積0.25 mm2 至 1.5 mm2（AWG24 至 16）
  • 集成式電壓橋接件，用于靈活形成電壓組(僅 35 mm 模塊)
  • 前連接器的預接線位置
  • 前蓋帶有可擴充的電纜室，即使*接線時也如此
  • 模塊正面的清晰標簽
    • 模塊類型
    • 訂貨號
    • 硬件和固件型號
    • 通道編號標簽
    • 電纜連接圖
含在供貨范圍之內：
  • 用于手工貼標簽的一個標簽條
  • 一個 U 型連接器
  • 印制有文字的前門
  • 前連接器（(僅 25 mm 模塊）
功能
  • 統一的顯示和診斷方式：
    • 故障（紅色 LED）和運行（綠色 LED）模塊狀態顯示
    • 用于信號狀態日志的信號狀態顯示。"0" 和日志。"1"（綠色 LED）或短路指示（紅色 LED）
    • 顯示 24 V DC 電源電壓（綠色 LED）
  • 支持的功能：
    • 識別和維護數據 IM0 至 IM3
    • 固件更新
    • 與通道有關的參數分配（僅限 HF 模塊）
    • 按通道進行診斷（僅限 HF 模塊）
    • 等時同步模式（取決于模塊）
    • 可以為輸出設置替換值（僅限于 35 mm 模塊）
  技術規范
Article number
6ES7522-1BH01-0AB0
6ES7522-1BL01-0AB0
6ES7522-1BF00-0AB0
6ES7522-5EH00-0AB0
 
S7-1500, DQ 16X24V DC/0.5A HF
S7-1500, DQ 32X24VDC/0.5A HF
S7-1500, DQ 8X24VDC/2A HF
S7-1500, DQ 16X24...48VUC/125VDC/0.5A ST
General information
 
 
 
 
Product type designation
DQ 16x24VDC/0.5A HF
DQ 32x24VDC/0.5A HF
DQ 8x24VDC/2A HF
DQ 16x24 ... 48VUC/125VDC/0.5A ST
HW functional status
FS01
FS01
FS01
FS01
Firmware version
V1.0.0
V1.0.0
V2.1.0
V1.0.0
  • ● FW update possible
Yes
 
Yes
Yes
Product function
 
 
 
 
  • ● I&M data
Yes; I&M0 to I&M3
Yes; I&M0 to I&M3
Yes; I&M0 to I&M3
Yes; I&M0 to I&M3
Engineering with
 
 
 
 
  • ● STEP 7 TIA Portal configurable/integrated as of version
V13 SP1 / -
V13 SP1 / -
V13 SP1 / -
V13 SP1 / -
  • ● STEP 7 configurable/integrated as of version
 
 
V5.5 SP3 / -
V5.5 SP3 / -
  • ● PROFIBUS as of GSD version/GSD revision
V1.0 / V5.1
V1.0 / V5.1
V1.0 / V5.1
V1.0 / V5.1
  • ● PROFINET as of GSD version/GSD revision
V2.3 / -
V2.3 / -
V2.3 / -
V2.3 / -
Operating mode
 
 
 
 
  • ● DQ
Yes
Yes
Yes
Yes
  • ● DQ with energy-saving function
No
No
Yes; with an application
No
  • ● PWM
No
No
Yes
No
  • ● Oversampling
No
No
No
No
  • ● MSO
Yes
Yes
Yes
Yes
Supply voltage
 
 
 
 
Rated value (DC)
24 V
24 V
24 V
 
permissible range, lower limit (DC)
20.4 V
20.4 V
20.4 V
 
permissible range, upper limit (DC)
28.8 V
28.8 V
28.8 V
 
Reverse polarity protection
Yes; through internal protection with 7 A per group
Yes; through internal protection with 7 A per group
Yes; through internal protection with 10 A per group
 
Input current
 
 
 
 
Current consumption, max.
30 mA
60 mA
40 mA; 20 mA per group, no output is activated.
 
Output voltage
 
 
 
 
Rated value (DC)
24 V
24 V
24 V
24 V; 48 V, 125 V
Rated value (AC)
 
 
 
24 V; 48 V (50 - 60 Hz)
Power
 
 
 
 
Power available from the backplane bus
1.1 W
1.1 W
0.9 W
2 W
Power loss
 
 
 
 
Power loss, typ.
2 W
3.5 W
5.6 W; 6.8 W for PWM operation
3.8 W
Digital outputs
 
 
 
 
Number of digital outputs
16
32
8
16
Current-sinking
 
 
 
Yes
Current-sourcing
Yes
Yes
Yes
Yes
Short-circuit protection
Yes; Clocked electronically
Yes; Clocked electronically
Yes
 
  • ● Response threshold, typ.
1 A
1 A
3 A
 
Limitation of inductive shutdown voltage to
L+ (-53 V)
L+ (-53 V)
-17 V
200 V (suppressor diode)
Controlling a digital input
Yes
Yes
Yes
Yes
Digital output functions, parameterizable
 
 
 
 
  • ● Freely usable digital output
 
 
Yes
 
  • ● PWM output
 
 
Yes
 
  • — Number, max.
 
 
2
 
  • — Cycle duration, parameterizable
 
 
Yes; 2 ... 100 ms continuous
 
  • — ON period, min.
 
 
0 %
 
  • — ON period, max.
 
 
100 %
 
  • — Resolution of the duty cycle
 
 
0.1 %
 
  • — Minimum pulse duration
 
 
300 µs
 
Switching capacity of the outputs
 
 
 
 
  • ● with resistive load, max.
0.5 A
0.5 A
 
0.5 A
  • ● on lamp load, max.
5 W
5 W
10 W
40 W; At 125 V DC, 10 W at 48 V UC, 5 W at 24 V UC
Load resistance range
 
 
 
 
  • ● lower limit
48 ?
48 ?
12 ?
 
  • ● upper limit
12 k?
12 k?
4 k?
 
Output voltage
 
 
 
 
  • ● for signal "1", min.
L+ (-0.8 V)
L+ (-0.8 V)
L+ (-0.8 V)
L+ (-1.0 V)
Output current
 
 
 
 
  • ● for signal "1" rated value
0.5 A
0.5 A
2 A
0.5 A
  • ● for signal "1" permissible range, max.
0.5 A
0.5 A
2.4 A; Note derating specification for PWM operation
0.6 A
  • ● for signal "0" residual current, max.
0.5 mA
0.5 mA
0.5 mA
 
Output delay with resistive load
 
 
 
 
  • ● "0" to "1", typ.
 
 
80 µs
 
  • ● "0" to "1", max.
100 µs
100 µs
100 µs
5 ms
  • ● "1" to "0", typ.
 
 
300 µs
 
  • ● "1" to "0", max.
500 µs
500 µs
500 µs
5 ms
Parallel switching of two outputs
 
 
 
 
  • ● for logic links
Yes
Yes
Yes
Yes
  • ● for uprating
No
No
No
No
  • ● for redundant control of a load
Yes
Yes
Yes
Yes
Switching frequency
 
 
 
 
  • ● with resistive load, max.
100 Hz
100 Hz
100 Hz; With PWM operation: 500 Hz
25 Hz
  • ● with inductive load, max.
0.5 Hz; According to IEC 60947-5-1, DC-13
0.5 Hz; According to IEC 60947-5-1, DC-13
0.5 Hz; According to IEC 60947-5-1, DC-13; max. 500 Hz with PWM operation only with external circuit; see additional description in the manual
0.5 Hz
  • ● on lamp load, max.
10 Hz
10 Hz
10 Hz
10 Hz
Total current of the outputs
 
 
 
 
  • ● Current per channel, max.
0.5 A; see additional description in the manual
0.5 A; see additional description in the manual
2 A; see additional description in the manual
0.5 A
  • ● Current per group, max.
4 A; see additional description in the manual
4 A; see additional description in the manual
8 A; see additional description in the manual
0.5 A
  • ● Current per module, max.
8 A; see additional description in the manual
16 A; see additional description in the manual
16 A; see additional description in the manual
8 A
Cable length
 
 
 
 
  • ● shielded, max.
1 000 m
1 000 m
1 000 m
1 000 m
  • ● unshielded, max.
600 m
600 m
600 m
600 m
Isochronous mode
 
 
 
 
Isochronous operation (application synchronized up to terminal)
Yes
Yes
No
No
Execution and activation time (TCO), min.
70 µs
70 µs
 
 
Bus cycle time (TDP), min.
250 µs
250 µs
 
 
Interrupts/diagnostics/status information
 
 
 
 
Diagnostics function
Yes
Yes
Yes
No
Substitute values connectable
Yes
Yes
Yes
Yes
Alarms
 
 
 
 
  • ● Diagnostic alarm
Yes
Yes
Yes
No
Diagnostic messages
 
 
 
 
  • ● Monitoring the supply voltage
Yes
Yes
Yes
No
  • ● Wire-break
Yes
Yes
No
No
  • ● Short-circuit
Yes
Yes
Yes
No
  • ● Group error
Yes
Yes
Yes
 
Diagnostics indication LED
 
 
 
 
  • ● RUN LED
Yes; Green LED
Yes; Green LED
Yes; Green LED
Yes; Green LED
  • ● ERROR LED
Yes; Red LED
Yes; Red LED
Yes; Red LED
Yes; Red LED
  • ● Monitoring of the supply voltage (PWR-LED)
Yes; Green LED
Yes; Green LED
Yes; Green LED
No
  • ● Channel status display
Yes; Green LED
Yes; Green LED
Yes; Green LED
Yes; Green LED
  • ● for channel diagnostics
Yes; Red LED
Yes; Red LED
Yes; Red LED
No
  • ● for module diagnostics
Yes; Red LED
Yes; Red LED
Yes; Red LED
Yes; Red LED
Potential separation
 
 
 
 
Potential separation channels
 
 
 
 
  • ● between the channels
No
No
No
Yes
  • ● between the channels, in groups of
8
8
4
1
  • ● between the channels and backplane bus
Yes
Yes
Yes
Yes
Permissible potential difference
 
 
 
 
between different circuits
 
 
 
125 V DC/48 V AC
Isolation
 
 
 
 
Isolation tested with
707 V DC (type test)
707 V DC (type test)
707 V DC (type test)
2 000 V DC
Ambient conditions
 
 
 
 
Ambient temperature during operation
 
 
 
 
  • ● horizontal installation, min.
0 °C
 
 
0 °C
  • ● horizontal installation, max.
60 °C
 
 
60 °C
  • ● vertical installation, min.
0 °C
 
 
0 °C
  • ● vertical installation, max.
60 °C
 
 
40 °C
Decentralized operation
 
 
 
 
Prioritized startup
Yes
Yes
Yes
Yes
Dimensions
 
 
 
 
Width
35 mm
35 mm
35 mm
35 mm
Height
147 mm
147 mm
147 mm
147 mm
Depth
129 mm
129 mm
129 mm
129 mm
Weights
 
 
 
 
Weight, approx.
230 g
280 g
240 g
230 g
 
Article number
6ES7522-5HF00-0AB0
6ES7522-5HH00-0AB0
6ES7522-5FF00-0AB0
6ES7522-5FH00-0AB0
 
S7-1500, DQ 8X230VAC/5A ST (RELAY)
S7-1500, DQ 16X230VAC/2A ST (RELAY)
S7-1500, DQ 8X230VAC/2A ST (TRIAC)
S7-1500, DQ 16X230VAC/1A ST (TRIAC)
General information
 
 
 
 
Product type designation
DQ 8x230 V AC/5 A ST (relay)
DQ 16x230VAC/2A ST (relay)
DQ 8x230 V AC/2A ST (triac)
DQ 16x230VAC/1A ST (Triac)
HW functional status
FS01
FS01
FS01
FS01
Firmware version
V2.0.0
V1.0.0
V2.0.0
V1.0.0
  • ● FW update possible
Yes
Yes
Yes
Yes
Product function
 
 
 
 
  • ● I&M data
Yes; I&M0 to I&M3
Yes; I&M0 to I&M3
Yes; I&M0 to I&M3
Yes; I&M0 to I&M3
Engineering with
 
 
 
 
  • ● STEP 7 TIA Portal configurable/integrated as of version
V12 / V12
V13 SP1 / -
V12 / V12
V13 SP1 / -
  • ● STEP 7 configurable/integrated as of version
V5.5 SP3 / -
V5.5 SP3 / -
V5.5 SP3 / -
V5.5 SP3 / -
  • ● PROFIBUS as of GSD version/GSD revision
V1.0 / V5.1
V1.0 / V5.1
V1.0 / V5.1
V1.0 / V5.1
  • ● PROFINET as of GSD version/GSD revision
V2.3 / -
V2.3 / -
V2.3 / -
V2.3 / -
Operating mode
 
 
 
 
  • ● DQ
Yes
Yes
Yes
Yes
  • ● DQ with energy-saving function
No
No
No
No
  • ● PWM
No
No
No
No
  • ● Oversampling
No
No
No
No
  • ● MSO
Yes
Yes
Yes
Yes
Supply voltage
 
 
 
 
Rated value (DC)
24 V
24 V
 
 
permissible range, lower limit (DC)
20.4 V
20.4 V
 
 
permissible range, upper limit (DC)
28.8 V
28.8 V
 
 
Reverse polarity protection
Yes
Yes
 
 
Input current
 
 
 
 
Current consumption, max.
80 mA
150 mA
 
 
Output voltage
 
 
 
 
Rated value (AC)
230 V; 24 V DC to 120 V DC / 24 V AC to 230 V AC
230 V; 24 V DC to 120 V DC / 24 V AC to 230 V AC
230 V; 120/230V AC, 50/60 Hz
230 V; 120/230V AC, 50/60 Hz
Power
 
 
 
 
Power available from the backplane bus
0.8 W
0.8 W
0.9 W
1.2 W
Power loss
 
 
 
 
Power loss, typ.
5 W
5 W
10.8 W
11.1 W
Digital outputs
 
 
 
 
Number of digital outputs
8
16
8
16
Current-sinking
Yes
Yes
 
Yes
Current-sourcing
Yes
Yes
Yes
Yes
Short-circuit protection
No
No
No
No
Controlling a digital input
possible
Yes
 
 
Switching capacity of the outputs
 
 
 
 
  • ● with resistive load, max.
 
 
2 A
1 A
  • ● on lamp load, max.
1 500 W; 10 000 operating cycles
50 W (230 V AC), 5 W (24 V DC)
50 W
50 W
  • ● Low energy/fluorescent lamps with electronic control gear
10x 58 W (25 000 operating cycles)
 
 
 
  • ● Fluorescent tubes, conventionally compensated
1x 58 W (25 000 operating cycles)
 
 
 
  • ● Fluorescent tubes, uncompensated
10x 58 W (25 000 operating cycles)
 
 
 
Output voltage
 
 
 
 
  • ● for signal "1", min.
 
 
L1 (-1.5 V) at maximum output current; L1 (-8.5 V) at minimum output current
L1 (-1.5 V) at maximum output current; L1 (-8.5 V) at minimum output current
Output current
 
 
 
 
  • ● for signal "1" rated value
5 A
2 A
2 A
1 A
  • ● for signal "1" permissible range, min.
5 mA; 10 V
10 mA; 10 V
10 mA
10 mA
  • ● for signal "1" permissible range, max.
8 A; thermal continuous current
2 A; thermal continuous current
15 A; max. 1 AC cycle
15 A; max. 1 AC cycle
  • ● for signal "0" residual current, max.
0 A
0 A
2 mA
2 mA
Output delay with resistive load
 
 
 
 
  • ● "0" to "1", max.
 
 
1 AC cycle
1 AC cycle
  • ● "1" to "0", max.
 
 
1 AC cycle
1 AC cycle
Parallel switching of two outputs
 
 
 
 
  • ● for logic links
Yes
Yes
No
No
  • ● for uprating
No
No
No
No
  • ● for redundant control of a load
Yes
Yes
Yes
Yes
Switching frequency
 
 
 
 
  • ● with resistive load, max.
2 Hz
1 Hz
10 Hz
10 Hz
  • ● with inductive load, max.
0.5 Hz
0.5 Hz
0.5 Hz
0.5 Hz
  • ● on lamp load, max.
2 Hz
1 Hz
1 Hz
1 Hz
Total current of the outputs
 
 
 
 
  • ● Current per channel, max.
8 A; see additional description in the manual
2 A; see additional description in the manual
2 A; see additional description in the manual
1 A; see additional description in the manual
  • ● Current per group, max.
8 A; see additional description in the manual
4 A; see additional description in the manual
2 A; see additional description in the manual
2 A; see additional description in the manual
  • ● Current per module, max.
64 A; see additional description in the manual
32 A; see additional description in the manual
10 A; see additional description in the manual
10 A; see additional description in the manual
Relay outputs
 
 
 
 
  • ● Number of relay outputs
8
16
 
 
  • ● Rated supply voltage of relay coil L+ (DC)
24 V
24 V
 
 
  • ● Current consumption of relays (coil current of all relays), typ.
80 mA
150 mA
 
 
  • ● external protection for relay outputs
With miniature circuit breaker with characteristic B for: cos φ 1.0: 600 A cos φ 0.5 ... 0.7: 900 A with 8 A Diazed fuse: 1000 A
Miniature circuit breaker B10 / B16
 
 
  • ● Contact connection (internal)
No
No
 
 
  • ● Size of motor starters according to NEMA, max.
5
5
 
 
  • ● Number of operating cycles, max.
4 000 000; see additional description in the manual
see additional description in the manual
 
 
  • ● Relay approved acc. to UL 508
Yes; 250 V AC/5 A g.p.; 120 V AC TV-4 tungsten; A300, R300
No
 
 
Switching capacity of contacts
 
 
 
 
  • — with inductive load, max.
see additional description in the manual
2 A; see additional description in the manual
 
 
  • — with resistive load, max.
see additional description in the manual
2 A; see additional description in the manual
 
 
Triac outputs
 
 
 
 
  • ● Size of motor starters according to NEMA, max.
 
 
5
4
Cable length
 
 
 
 
  • ● shielded, max.
1 000 m
1 000 m
1 000 m
1 000 m
  • ● unshielded, max.
600 m
600 m
600 m
600 m
Isochronous mode
 
 
 
 
Isochronous operation (application synchronized up to terminal)
No
No
No
No
Interrupts/diagnostics/status information
 
 
 
 
Diagnostics function
Yes
Yes
No
No
Substitute values connectable
Yes
Yes
Yes
Yes
Alarms
 
 
 
 
  • ● Diagnostic alarm
Yes
Yes
No
No
Diagnostic messages
 
 
 
 
  • ● Monitoring the supply voltage
Yes
Yes
No
No
  • ● Wire-break
No
No
No
No
  • ● Short-circuit
No
No
No
No
Diagnostics indication LED
 
 
 
 
  • ● RUN LED
Yes; Green LED
Yes; Green LED
Yes; Green LED
Yes; Green LED
  • ● ERROR LED
Yes; Red LED
Yes; Red LED
Yes; Red LED
Yes; Red LED
  • ● Monitoring of the supply voltage (PWR-LED)
Yes; Green LED
Yes; Green LED
No
No
  • ● Channel status display
Yes; Green LED
Yes; Green LED
Yes; Green LED
Yes; Green LED
  • ● for channel diagnostics
No
No
No
No
  • ● for module diagnostics
Yes; Red LED
Yes; Red LED
Yes; Red LED
Yes; Red LED
Potential separation
 
 
 
 
Potential separation channels
 
 
 
 
  • ● between the channels
Yes; Switching of different phases permitted
No
Yes
No
  • ● between the channels, in groups of
1
2
1
2
  • ● between the channels and backplane bus
Yes
Yes
Yes
Yes
  • ● Between the channels and load voltage L+
Yes
Yes
 
 
  • ● Between the channels and load voltage L1
 
 
Yes
 
Permissible potential difference
 
 
 
 
between different circuits
250 V AC between the channels and the supply voltage L+; 250 V AC between the channels and the backplane bus; 500 V AC between the channels
250 V AC between the channels and the supply voltage L+; 250 V AC between the channels and the backplane bus; 500 V AC between the channels
250 V AC between the channels and the backplane bus; 500 V AC between the channels
250 V AC between the channels and the backplane bus; 500 V AC between the channels
Isolation
 
 
 
 
Isolation tested with
Between channels: 3 100 V DC; between channels backplane bus: 3 100 V DC; between L+ and backplane bus: 707 V DC (type test)
Between channels: 3 100 V DC; between channels backplane bus: 3 100 V DC; between L+ and backplane bus: 707 V DC (type test)
3 100 V DC
3 100 V DC
Ambient conditions
 
 
 
 
Ambient temperature during operation
 
 
 
 
  • ● horizontal installation, min.
0 °C
0 °C
0 °C
0 °C
  • ● horizontal installation, max.
60 °C
60 °C
60 °C
60 °C
  • ● vertical installation, min.
0 °C
0 °C
0 °C
0 °C
  • ● vertical installation, max.
40 °C
40 °C
40 °C
60 °C
Decentralized operation
 
 
 
 
Prioritized startup
Yes
Yes
Yes
Yes
Dimensions
 
 
 
 
Width
35 mm
35 mm
35 mm
35 mm
Height
147 mm
147 mm
147 mm
147 mm
Depth
129 mm
129 mm
129 mm
129 mm
Weights
 
 
 
 
Weight, approx.
350 g
350 g
290 g
310 g
 
Article number
6ES7522-1BH10-0AA0
6ES7522-1BL10-0AA0
 
S7-1500, DQ 16X24VDC/0.5A BA
S7-1500, DQ 32X24VDC/0.5A BA
General information
 
 
Product type designation
DQ 16x24VDC/0.5A BA
DQ 32x24VDC/0.5A BA
HW functional status
FS01
FS01
Firmware version
V1.0.0
V1.0.0
  • ● FW update possible
Yes
Yes
Product function
 
 
  • ● I&M data
Yes; I&M0 to I&M3
Yes; I&M0 to I&M3
Engineering with
 
 
  • ● STEP 7 TIA Portal configurable/integrated as of version
V13 / V13
V13 / V13
  • ● STEP 7 configurable/integrated as of version
V5.5 SP3 / -
V5.5 SP3 / -
  • ● PROFIBUS as of GSD version/GSD revision
V1.0 / V5.1
V1.0 / V5.1
  • ● PROFINET as of GSD version/GSD revision
V2.3 / -
V2.3 / -
Operating mode
 
 
  • ● DQ
Yes
Yes
  • ● DQ with energy-saving function
No
No
  • ● PWM
No
No
  • ● Oversampling
No
No
  • ● MSO
Yes
Yes
Supply voltage
 
 
Rated value (DC)
24 V
24 V
permissible range, lower limit (DC)
20.4 V
20.4 V
permissible range, upper limit (DC)
28.8 V
28.8 V
Reverse polarity protection
Yes; through internal protection with 7 A per group
Yes; through internal protection with 7 A per group
Input current
 
 
Current consumption, max.
30 mA
60 mA
Output voltage
 
 
Rated value (DC)
24 V
24 V
Power
 
 
Power available from the backplane bus
1.15 W
1.15 W
Power loss
 
 
Power loss, typ.
2.2 W
3.8 W
Digital outputs
 
 
Number of digital outputs
16
32
Current-sourcing
Yes
Yes
Short-circuit protection
Yes
Yes
  • ● Response threshold, typ.
1 A
1 A
Limitation of inductive shutdown voltage to
L+ (-53 V)
L+ (-53 V)
Controlling a digital input
Yes
Yes
Switching capacity of the outputs
 
 
  • ● with resistive load, max.
0.5 A
0.5 A
  • ● on lamp load, max.
5 W
5 W
Load resistance range
 
 
  • ● lower limit
48 ?
48 ?
  • ● upper limit
12 k?
12 k?
Output voltage
 
 
  • ● for signal "1", min.
L+ (-0.8 V)
L+ (-0.8 V)
Output current
 
 
  • ● for signal "1" rated value
0.5 A
0.5 A
  • ● for signal "1" permissible range, max.
0.5 A
0.5 A
  • ● for signal "0" residual current, max.
0.5 mA
0.5 mA
Output delay with resistive load
 
 
  • ● "0" to "1", max.
100 µs
100 µs
  • ● "1" to "0", max.
500 µs
500 µs
Parallel switching of two outputs
 
 
  • ● for logic links
Yes
Yes
  • ● for uprating
No
No
  • ● for redundant control of a load
Yes
Yes
Switching frequency
 
 
  • ● with resistive load, max.
100 Hz
100 Hz
  • ● with inductive load, max.
0.5 Hz; According to IEC 60947-5-1, DC-13
0.5 Hz; According to IEC 60947-5-1, DC-13
  • ● on lamp load, max.
10 Hz
10 Hz
Total current of the outputs
 
 
  • ● Current per channel, max.
0.5 A; see additional description in the manual
0.5 A; see additional description in the manual
  • ● Current per group, max.
4 A; see additional description in the manual
4 A; see additional description in the manual
  • ● Current per module, max.
8 A; see additional description in the manual
16 A; see additional description in the manual
Cable length
 
 
  • ● shielded, max.
1 000 m
1 000 m
  • ● unshielded, max.
600 m
600 m
Isochronous mode
 
 
Isochronous operation (application synchronized up to terminal)
No
No
Interrupts/diagnostics/status information
 
 
Diagnostics function
No
No
Substitute values connectable
No
No
Alarms
 
 
  • ● Diagnostic alarm
No
No
Diagnostic messages
 
 
  • ● Monitoring the supply voltage
No
No
  • ● Wire-break
No
No
  • ● Short-circuit
No
No
  • ● Group error
No
No
Diagnostics indication LED
 
 
  • ● RUN LED
Yes; Green LED
Yes; Green LED
  • ● ERROR LED
Yes; Red LED
Yes; Red LED
  • ● Monitoring of the supply voltage (PWR-LED)
Yes; Green LED
Yes; Green LED
  • ● Channel status display
Yes; Green LED
Yes; Green LED
  • ● for channel diagnostics
No
No
  • ● for module diagnostics
No
No
Potential separation
 
 
Potential separation channels
 
 
  • ● between the channels
No
No
  • ● between the channels, in groups of
8
8
  • ● between the channels and backplane bus
Yes
Yes
Isolation
 
 
Isolation tested with
707 V DC (type test)
707 V DC (type test)
Decentralized operation
 
 
Prioritized startup
Yes
Yes
Dimensions
 
 
Width
25 mm
25 mm
Height
147 mm
147 mm
Depth
129 mm
129 mm
Weights
 
 
Weight, approx.
230 g
280 g
Other
 
 
Note:
Supplied incl. 40-pole push-in front connectors
Supplied incl. 40-pole push-in front connectors
  
            

            
            
產品咨詢

            







	
留言框  

	
    
		
  • 
			
    產品：
    
			
    
		
    • 
		
  • 
			
    您的單位：
    
			
    
		
    • 
		
  • 
			
    您的姓名：
    
			
    
		
    • 
		
  • 
			
    聯系電話：
    
			
    
		
    • 
		
  • 
			
    常用郵箱：
    
			
    
		
    • 
        
  • 
			
    省份：
    
			
    
		
    • 
		
  • 
			
    詳細地址：
    
			
    
		
    • 
		
        
  • 
			
    補充說明：
    
			
    
		
    • 
		
  • 
			
    驗證碼：
    
			
    
            	
    
                    
                    
                
    
                請輸入計算結果（填寫阿拉伯?dāng)?shù)字），如：三加四=7
            
    
		
    • 
		
  • 
			
    
			
    
		
    • 
	
	
    






    
    		
            
        

        

    









  

    
  

  

    

      

        

          
聯系我們 

          上海翰粵自動化系統有限公司
          公司地址：上海市松江區思賢路2399弄137號   技術支持：化工儀器網 
          
    
            
  • 聯系人：黃政武
    • 
            
  • QQ：76868608
    • 
            
  • 公司傳真：021-57657276
    • 
            
  • 郵箱：76868608@qq.com
    •  
          

          
         

         

         
掃一掃 更多精彩
  
          

            
            
微信二維碼

           

          

            
            
網站二維碼